Ronseal Diamond Hard Slate Garage Floor Paint 5L

Ronseal Diamond Hard Garage Floor Paint is tough enough to park your car on and withstand oil, grease and petrol spills. It is touch dry in four hours, covers up to 12 m² per litre and has a smooth finish so your floor is protected and looks great. This product covers 12 m²/litre, needs 2 to 3 coats, can be applied with a brush, roller or pad, is dry to touch in 4 hours and if needed can be recoated in 4 hours. Open all your doors and windows to ensure the best ventilation and move everything out of your garage. Clean up any oil and grease stains (oven cleaner and some vigorous scrubbing may work, otherwise call in a professional). To prepare bare garage floors for painting - Newly laid concrete needs to be left alone to set for a month before you can paint it. Use a wire brush to clean the floor and remove dust and dirt. Concrete floors can react to the paint and crack or blister so seal the floor first with a stabilising solution. Or you can dilute the paint with 10% water. To prepare previously painted garage floors - Clean the floor with a wire brush to dislodge dust and dirt and wipe it down with white spirit. Use a large brush, roller or pad to apply the paint. Give the paint a thorough stir. Start at the far end of the garage and paint towards the door. Work in small sections and remember to not paint yourself into a corner! For the best coverage, you’ll need to apply two or three coats. Leave four to six hours between coats for the best effect. The floor will be hardest after 72 hours. That’s when you can start moving your car and things back into the garage.