Ronseal One Coat Black Gloss Tile Paint 750ml

Ronseal One Coat Tile Paint can transform your old tiles in just one coat. You don't even need to use a primer. It's tough and durable so it'll stand up to knocks, scuffs and spills. This product covers 8 m²/litre, needs 1 coat, can be applied with a brush, is dry to touch in 1 hour and if needed can be recoated in 1 hour. Make sure your room is above 10°C and open a window to keep it ventilated. Cover anything you don’t want to get paint over. Clean grout with Ronseal Grout Cleaner and fix any damaged grout before painting. Then make sure your tiles are cleaned thoroughly to remove all dust, dirt and grease and wipe with a damp cloth. Give the paint a really good stir. Then paint it on with a synthetic brush. To get the best finish, go up and down, not side to side, on each tile. It’ll be touch dry in just 1 hour, but don’t get it wet for the next 24 hours. Most of the time one coat is all you ever need. But, if you’re painting over a bold colour you may need a second coat. If this is the case, leave the first coat to dry for 4 hours. Then give it a light sand with 240grit sandpaper and wipe with a damp cloth. Once the surface is dry put the second coat on.