Ronseal One Coat Everywhere Midnight Sky Matt Interior Paint 2.5L

Ronseal One Coat Everywhere paint makes decorating your whole home easier and quicker. It'll give rich colour and tough protection to walls, ceilings and pretty much anything else you want to paint. It's stain resistant and washable, ready to stand up to the challenges of every day life. This product covers 25 m²/litre, needs 1 coat, can be applied with a brush or roller, is dry to touch in 1 hour and if needed can be recoated in 1 hour. For previously painted walls: Sand off any loose or flaking paint. Then give the walls a wipe with a damp cloth. If painting over a very bold or contrasting colour, use a basecoat first. Or you may need to put on an extra coat. For bare plaster: If you've had your walls and ceilings re-plastered, let it dry for 7 days before painting. You'll then need to seal the plaster. Use a basecoat or a plaster sealer for this. For bare & previously painted wood: Give the wood a light sand with 120 grit sandpaper, then wipe away the dust with a damp cloth. Fill any holes and cracks and treat any knots. For bare and painted metal: Sand of any loose and flaking paint, then wipe away the dust with a damp cloth. *If you're painting ferrous metals, like steel or cast iron, you'll need to use a specialist metal primer first. Give your paint a good stir. If you've got more than one tine of the same colour, mix them together. This'll ensure the colour is consistent. Get lots of paint on your roller or brush. Always work from dry to wet areas. Don't spread the paint too thin. Extra coats may be needed when trying to cover bold or contrasting colours. It'll be touch dry in 1 hour. If the second coat is needed wait 2-4 hours. Do not thin this paint.