Ronseal White Matt Anti Condensation Paint 750ml

Ronseal Anti Condensation Paint adds an extra layer of insulation to your wall and puts a stop to condensation building up and mould growing. This product covers 6 m²/litre, needs 2 coats, can be applied with a brush, is dry to touch in 2 hours and if needed can be recoated in 2 hours. To prepare a wall for painting, check if the wall is affected by mould. If the wall is affected by mould, use a mould killer to completely remove it. Don’t sand off the mould or attempt to remove it in any other way as you could spread the mould spores. Damp stains can be covered with a damp seal. Remove any wallpaper and get rid of any loose paint or plaster by giving it a quick sand. Make sure the area you’re painting is clean and dry. Thoroughly stir the paint to make sure the consistency is smooth. Pour the paint into a tray and cover a roller or paintbrush in it. Apply to the wall but don’t brush or roller it out too thinly. Wait four hours for the first coat to dry. Apply a second coat. The wall will be touch dry in one to two hours and ready to be painted over after four hours.