Wilko 32mm Chrome Finish Universal Sink and Basin Waste

Get that plumbing job done in no time with our quality universal chrome finish sink and basin waste. Essential for both DIY and professional plumbers, the 32mm slotted sink and basin waste is an ideal replacement in chrome finish to match your other fittings. Easy to fit, the waste is non-corrosive to offer lasting use. Directions for use: Ensure the taps are fully closed. Disconnect existing pipework connected to the old waste body. Note: Take care against any potential water spillage on removal. Ensure the tapered washer (B) is placed over the waste body (A) with the wider side facing upwards and pushed up to the top of the waste body. Position the waste body (A) in the outlet hole of the sink/ basin, seating it on a bed of silicone sealant for a good seal. Ensure that the overflow slots in the waste body face the integral sink/ basin overflow slots. Underneath the sink/ basin, place the rubber seal (C) with the rounded surface facing down and silicone sealant applied to both faces. Screw backing nut (D) onto the waste body with the circular face being upwards and firmly hand-tighten. On ceramic sinks/ basins, take care not to over-tighten to avoid cracking the sink/ basin. Reconnect pipework to the newly fitted waste body. Allow sufficient time for the silicone to cure and check for leaks.